The "VERT"

[k062693w]

I'm Done !!!

The first reasonable offer gets it !!!

For those that don't know the car here is the link to the build...
The last few pages show the current state of the rebuild it's in ...
http://www.daytonstangboard.com/forum/showthread.php?t=6049



Currently a rolling chassis
6 point cage ... I have the other bars to make it an 8 point
Weld in Frame ties
8.8 with FMS posi and 4.10's
QA1 K-member
UPR control arms
UPR coil overs
Flaming River Manual rack

Parts I have not installed yet
Electric fuel pump
Aluminum fuel line
Fuel Pressure regulator
4 point harnesses
Tubular rear upper and lower control arms
GT Springs
Quarter stick shifter
New glass back window
I have 2 double hump crossmembers and a stock fox driveshaft

Interior is out, But I have all of it
It will come with the 10 holes and tires, but for the right money I have a set of Big and Little welds with D/Rs


For those that have seen it, You know it's a SUPER CLEAN car !!!

I'm sure there are some things I'm forgetting, I will go out in the garage later and go through the parts and update the list...

Feel free to ask any questions... Or if there is a specific pic of something you want to see..

With a Motor, Tranny, Steering Shaft, And re-installing the interior Someone could have a Really nice 4EYE !!!



Thanks

[cstreu1026]

Why???????

[k062693w]

Why???????

I believe the first line in the thread says why ??? LOL

[cstreu1026]

sort of but not really

[Goober]

Unless you are buying something to replace it, you will be kicking yourself in the ass later. Trust me, I've done it too many times.

[k062693w]

Trust me Goober, After 40 years it won't be the first time I've done something and kicked myself in the A$$ later for... And I'm sure it won't be the last...
Hell I've still got footprints on it from over the years !!! LOL

[cstreu1026]

i thought those were your wife's foot prints

[k062693w]

Sometimes I just can't do it fast enough, So she helps out !!! LMAO

[NXCoUpE]

Wow! This is one clean little vert. Can't believe you are doing it, but I can understand the frustration with having a car sit and not see the end in site for finishing it. Am I close?

[k062693w]

I'm not selling it because it isn't done... I'm not selling it because I don't see it getting finished... I'm not selling it because I need the Money... I'm not selling it because I found another car... I'm not selling it because the wife told me too ( The post that was deleted above was posted by my wife saying that it wasn't for sale !!! LOL )... I'm not selling it for any other reason then what I said originally... "I'M DONE" !!! LOL

I really don't know what I should ask for it, I just know that I'm not going to give it away...

Maybe some of you (That have seen the car in person) that know what it's worth or what I should ask for it... Feel Free to PM me your suggestion...


Thanks

[white01]

Sorry to hear that your giving up on it. Good luck with what ever you end up with after the sale. This is 1 clean vert. for someone looking for something to finish.

Rich

[evil8]

Somebody wants an LSx powered whip!!

[k062693w]

Somebody wants an LSx powered whip!!

Find me a deal on about any of the LS motors and an auto tranny and I just might be tempted to make a Bastard Stang !!! :crossbonesgif:

[BlackPony]

really wish I had the extra cash to spend. Super clean car

[k062693w]

Thanks Steve !!! I think any one would be hard to find a 4 eye'd vert as rust free as mine ...
Like I said above, I don't need the money so it will take the right amount of cash to buy it... Just imagine what I could make parting it out !!! What would a set of rust free 85 doors go for, Or a rust free Deck lid ??? LOL I would never do that.... That would just be sacrilege !!!

[k062693w]

And off the subject !!! But how the hell have you been Matt (blk93ntch) ??? I see you lurking on here and never posting !!! LOL

Give me a call sometime !!!

[RIXXX93GT]

Wish we could have run em this year Aaron, sometimes you gots ta do whatcha gots ta do, good luck with selling one seriously nice car.

[k062693w]

Thanks Rick !!!

[evil8]

Find me a deal on about any of the LS motors and an auto tranny and I just might be tempted to make a Bastard Stang !!! :crossbonesgif:

Make sure you talk to me tomorrow, me gotz connections.

[Goober]

Make sure you talk to me tomorrow, me gotz connections.

A.K.A. Hellboy's heart is for sale?

[ibstrokin]

I know you don't need the money, but selling an unfinished car kills the value. My advice (unsolicated) would be too finish it, then sell it. Or do what I do, let it sit for a while until you get motivated again.

Either way, good luck with it.

[NXCoUpE]

what he said^

[blk93notch]

i will say this is the cleanest 4 eye i have ever saw. if i had the cash i would be all over this.


off the subject....things were going great but the past couple days its been turned upside down. i was suppose to be going to wyotech this month but my fiance that was moving over there with me has got cold feet and thrown a wrench in the deal with only two weeks till school. looks like ill be going in april. so whats up with you...except getting banned. lol

[NXCoUpE]

Wyotech, huh? YOu are going to Wyoming or PA? PA is the newer one but smaller.

[Rich]

Aaron,

DON'T DO IT!!!!!

I've been down this road many times and have regretted every single one. Trust me, let it sit for a while. Come spring, if you feel the same way then sell it. You're going to get nickels on the dollar at this point.

At times I wish I just had a nice cruiser to toy around in...much more simple and less expensive.

[evil8]

A.K.A. Hellboy's heart is for sale?

No way homey! If any car gets that engine, it will be my notch.

[k062693w]

No way homey! If any car gets that engine, it will be my notch.

LOL !!! John and I were just talking about this !!!

I said to him, Just imagine your motor and an auto in my car on a 200 shot !!!
At least 1000 lbs ligher... I personally think it would be SICK and still so Streetable !!! :crossbonesgif:

[Goober]

As much as I am against brand swapping, it would be pretty sweet and super sleeper.

[blk93notch]

Wyotech, huh? YOu are going to Wyoming or PA? PA is the newer one but smaller.

the one in pa. after talking to my counslor today they can get me in a dorm type apartment so im starting sept 28.

im actually going for street rod building and custom interior.

[NXCoUpE]

Wow, sounds like fun! I was asked to come out and interview at the wyoming campus, but my wife at the time said no. Now I wish I would have just gone! She's gone anyway! lol. You will have a good time and learn a lot from them. Of all the schools I could send students too, they and Sinclair are the only two I would consider. good luck!

[blk93notch]

thanks im looking forward to it alot.

[k062693w]

See Matt was that so hard ??? LMAO

Good to hear from you Buddy !!!
Keep us updated... PM me your #

Take care

[blk93notch]

See Matt was that so hard ??? LMAO

Good to hear from you Buddy !!!
Keep us updated... PM me your #

Take care

yea i know. i can tend to be antisocial. plus ive been here more than stangbangerz after seeing the thread of yours and some other things.