Mustang parts for sale

[Cool Hand]

Here is a list of items I have that I need to get rid of. I can ship these items, or I might possibly be able to deliver them. I can get pictures of any of these items. All prices are flexible. I'm drudging through my last year of college and the funds are low, catch me on the right day and you never know what I'd say.

99-04 Fiberglass bolt-on Cobra R hood. I am not sure what brand, it came with the car. It is currently unpainted. Never been put on a car.
$325

Moroso solid motor mounts for a Fox body car and what I believe to be a Moroso solid tranny mount for fox body car.
$75

Trickflow pushrods 6.450 .080 Full Set
$50

Factory 01 Cobra H-pipe with Cats. Stainless steel, looks like its never been on the road.
Make offer

Fox body off-road H-pipe. Its a little rough. O2 bungs have bolts welded in them, but seals up well.
Make offer

Double valve springs with isolaters. They were on a set of Ported trickflow heads when i bought them, deemed to big for a non-roller cam by compcams. Visibly bigger than my compcams 987-16 springs. I can get number off of these within a day or 2 if interested.
$50

01 Cobra rear seats. Black with grey inserts.
Make offer

Bags and bins of stock foxbody, 5.0 and 5.8W engine parts. Rocker arms, head bolts, pushrods,ect. Oil pump pick up tubes, one from a 95 351 van, another from a 1980's crown vic. These are not however the tubes needed to put a 351W in a foxbody.
Make me an offer on anythingI might have sitting around, I have all kinds of stuff floating around here.

I'm sure theres more, I'll add more items as i find them.

Email me Clarkls@purdue.edu

[92 Coupe]

Trickflow pushrods 6.450 .080 Full Set
$50

What did you run these pushrods in?

I need longer ones since i changed my cam and rocker combo. And i have pedestal mount rockers with no adjustment and i have a little bit of ticking noise.

[Cool Hand]

I've never ran them. They came with the heads I have on my car now. I'm pretty sure they are out of a roller motor 302 with twisted wedge heads. Might be solid roller though. You'd have to actually check the length you would need. I've never run TW heads on a 302, so I'm not a good source.

Micheal, any ideas???

[93LXVert]

I am running 6.75 inch trickflow pushrods with twisted wedge heads on my 302

[NXCoUpE]

stock length pushrods are in the 6.250 range. These would be nearly a 1/4" longer, so bolt down rockers wouldn't be able to compensate for that length. It would hold you valves open more than likely. The only way to be sure is to use an adjustable pushrod to check the length.

[92 Coupe]

Ok thanks guys, I made an adjustable pushrod checker just havent had time to get in there and see what i need. Length wise, I appreciate the info.