SonicBlue02
04-09-2011, 10:25 AM
This was my winter car/DD for the past year. The Stang is gone, so I no longer need it.
1995 Mercedes Benz E320 with 211,xxx miles.It runs very good and has been a great car. I replaced the driver's front control arm in January (The ball joint was bad and they are welded in this particular model). While I was in there I replaced the coil spring due to the stocker being cracked. When I put it back together, the rotor was contacting either the dust shield or the control arm. I thought the aftermarket control arm may not be to exact spec, so I ground on it a little and it improved, but still is not perfect. The rotor is warped, so that will need replaced. I have the new spring for the passenger side. The car leaks a little oil and tranny fluid. The oil (i believe) is from a sensor at the top of the motor. Should be a simple fix. The tranny leak is from a pressure relief valve. The rear bumper is cracked and the front airdam has a piece broken off.
Now that I got the bad stuff out of the way....the interior is in great shape with heated front seats. Heat and A/C work flawlessly. Power sunroof works as well. The driver's window only goes down halfway. It seems that something is blocking the track. It has a 6-disc cd changer from the factory. Tires are in great shape. It will need alignment as I also replaced the tie tod end. There is no rust, but a couple of small faded spots. The tranny (or something) wines intermittently. Chad393na has done most of the work on this car (with the exception of the recent suspensionwork) and is very familiar with it. The car is drivable, but the warped rotor is very noticable. It runs very good and is a luxurious car. I don't want to spend the money to get it back into tip top shape, so......
$1,200.OBO
I can be reached at 937-367-8747. Clear title in hand. Rides like a dream!!
http://i241.photobucket.com/albums/ff224/jet50213/e320001.jpg
http://i241.photobucket.com/albums/ff224/jet50213/e320002.jpg
http://i241.photobucket.com/albums/ff224/jet50213/e320003.jpg
http://i241.photobucket.com/albums/ff224/jet50213/e320004.jpg
1995 Mercedes Benz E320 with 211,xxx miles.It runs very good and has been a great car. I replaced the driver's front control arm in January (The ball joint was bad and they are welded in this particular model). While I was in there I replaced the coil spring due to the stocker being cracked. When I put it back together, the rotor was contacting either the dust shield or the control arm. I thought the aftermarket control arm may not be to exact spec, so I ground on it a little and it improved, but still is not perfect. The rotor is warped, so that will need replaced. I have the new spring for the passenger side. The car leaks a little oil and tranny fluid. The oil (i believe) is from a sensor at the top of the motor. Should be a simple fix. The tranny leak is from a pressure relief valve. The rear bumper is cracked and the front airdam has a piece broken off.
Now that I got the bad stuff out of the way....the interior is in great shape with heated front seats. Heat and A/C work flawlessly. Power sunroof works as well. The driver's window only goes down halfway. It seems that something is blocking the track. It has a 6-disc cd changer from the factory. Tires are in great shape. It will need alignment as I also replaced the tie tod end. There is no rust, but a couple of small faded spots. The tranny (or something) wines intermittently. Chad393na has done most of the work on this car (with the exception of the recent suspensionwork) and is very familiar with it. The car is drivable, but the warped rotor is very noticable. It runs very good and is a luxurious car. I don't want to spend the money to get it back into tip top shape, so......
$1,200.OBO
I can be reached at 937-367-8747. Clear title in hand. Rides like a dream!!
http://i241.photobucket.com/albums/ff224/jet50213/e320001.jpg
http://i241.photobucket.com/albums/ff224/jet50213/e320002.jpg
http://i241.photobucket.com/albums/ff224/jet50213/e320003.jpg
http://i241.photobucket.com/albums/ff224/jet50213/e320004.jpg